English
Home > Products > N type pool anchor

China N type pool anchor Manufacturer, Supplier, Factory

To get the stage of realizing dreams of our employees! To build a happier, more united and much more skilled crew! To reach a mutual benefit of our prospects, suppliers, the society and ourselves for N type pool anchor,hhp pool anchor, Every one of the views and strategies are going to be tremendously appreciated! The good cooperation could enhance each of us into much better development!
N type pool anchor, The best and original quality for spare parts is a most important factor for transportation. We may stick on supplying original and good quality parts even a little profit earned. God will bless us to do kindness business forever.

Related Products

Hot Products

  • D-HONG HHP Anchor

    D-HONG HHP Anchor

    Andy Marine is a large heavy industry enterprise specializing in the research and production of D-HONG HHP Anchor.
  • AISI316 Marine Grade Stainless Steel Plough/Plow Anchor

    AISI316 Marine Grade Stainless Steel Plough/Plow Anchor

    - ALASTIN MARINE AISI316 Marine Grade Stainless Steel Plough/Plow Anchor is constructed from marine grade stainless steel.
    - This design allows rotation over 70 degrees in any one direction.
    - The hinged plow performs well in most seabeds including mud, rock, and grass.
    - A variety of weights are available. (Refer to dimension table for details).
    - Support private LOGO customization.
  • CBT3672-2016 Single Point Mooring Chain Stopper

    CBT3672-2016 Single Point Mooring Chain Stopper

    Andy Marine is a large heavy industry enterprise specializing in the research and production of CBT3672-2016 Single Point Mooring Chain Stopper.
  • CJ-14SB High Holding Power Anchor

    CJ-14SB High Holding Power Anchor

    Andy Marine is a large heavy industry enterprise specializing in the research and production of CJ-14SB High Holding Power Anchor.
  • JIS F 2017-1982 Panama Chock

    JIS F 2017-1982 Panama Chock

    Andy Marine is a large heavy industry enterprise specializing in the research and production of JIS F 2017-1982 Panama Chock.
  • JIS F 2005-1975 Closed Chock

    JIS F 2005-1975 Closed Chock

    Andy Marine is a large heavy industry enterprise specializing in the research and production of JIS F 2005-1975 Closed Chock.
  • Related Blog
  • Reviews

  • The Combination Of Anchor And Chain

    The purpose of the anchor is to hold the ship in place at sea and prevent it from drifting. First, the anchor crown hits the bottom, and then the anchor body falls down. At this time, under the action of the balance pole, the tip of the anchor Java will also touch the bottom, but it will not catch the sand. The ship will continue to drop a certain length of the ship's chain, so that most of the ship's chain is laid flat on the sea floor.

  • Introduction to Mooring Buoy-3

    Extreme environment: It needs to withstand typhoons, huge waves or the impact of icebergs, which puts forward high requirements for material strength and design. Biological adhesion: Long-term soaking can cause barnacles and algae to adhere. Regular cleaning is necessary to maintain buoyancy. Human vandalism: There is a possibility of theft or accidental collision by ships. Enhanced protection is required through the monitoring system.

  • Small And Powerful - Marine Anchor

    Ship's anchor is mainly composed of anchor shaft, anchor claw, anchor rod and anchor shackle, etc. After the ship arrives at the berthing area, the crew will anchor, and the ship's anchor will sink into the sea under the traction of the anchor chain.

  • Installation at Singapore Terminal - providing services that other manufacturers in the industry do not have

    Hongda Shipping Company MV BAO GLORY ordered a batch of 78mm anchor chain, the ship called at the port of Singapore for maintenance, according to customer requirements, in addition to providing anchor chain products

  • What if the sea is too deep and the ship's chain is not long enough?

    The anchor is a device used by all kinds of ships when they are mooring. Almost every ship is equipped with an anchor. When a ship does not need to sail on the sea or is docked in a port, the anchor is thrown onto the seabed. Through the friction between the anchor and the seabed, it can fix the ship on the sea surface. In this way, there is no need to worry that the ship will be blown away by the waves. But what if the water is too deep and the anchor chain of a warship is not long enough?

  • Why is a Ship's Rope Fixed to a Plain Bollard

    Ship ropes are mostly used in port and dock operations. It plays a towing role on the docked ships, and with the fixed rope, there is no need to worry about the ship being blown away in windy weather. Every time a ship is about to dock, it throws a rope, which is fixed to a bollard on the shore.

Send Inquiry

Hit enter to search or ESC to close
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept