A holding-power figure depends on the seabed and the test behind it. What sand, mud and clay change, and which questions to ask before comparing anchors.
A ship anchor is held for sea by more than the hawse pipe. What the pocket, lashing and chain stopper each do, and what to check on the drawings.
How a ship anchor windlass is sized, what the 45% and 80% brake ratings mean, and which shop and on-board tests apply with or without a chain stopper.
Ship anchors are not one manufacturing route. How casting, forging and fabrication split by component, and which tests and certificates follow each.
Replacing a ship's anchor? Match the mass basis, the approved size range, the drawing dimensions, the chain end and the class record before ordering.
Type approval is not unit inspection, and a 3.1 certificate is not the anchor certificate. What each paper in an anchor file covers, and what none proves.