A chain locker stores the inboard length of a ship's anchor chain; a chain pipe leads the cable between the windlass area and that storage space. Its arrangement also has to be read alongside water-ingress control, drainage and the attachment of the chain's inboard end, known as the bitter end. These are related but distinct jobs. A closure is not a drain, and a bitter-end attachment is not a substitute for the normal anchoring load-holding arrangement. Understanding the boundaries between them makes a drawing more useful than simply locating a compartment labelled “chain locker.”
Trace the chain from the windlass into the locker
The chain pipe, also called a spurling pipe in this context, is the inward route to the locker. Wärtsilä describes a chain pipe directly beneath the windlass, but the exact layout should be read from the vessel's own drawings rather than assumed identical on every ship. The hawse pipe is a different part of the route, toward the anchor; it should not be confused with the pipe leading down into storage.
The locker is the space for the chain, not merely the opening at the top of the pipe. When studying a drawing, follow the route from the windlass area through the pipe to the stowage space, then identify the inboard end and its connection to the ship. The anchoring system overview shows how that below-deck part relates to the rest of the system.
Storage volume is not the same as usable lead
Capacity matters, but a useful storage arrangement also depends on the shape of the space and the lead into the pipe. In the January 2019 Common Structural Rules for Bulk Carriers and Oil Tankers, the locker is to have adequate capacity and suitable form for proper stowage, with an easy direct lead into the chain pipes when the cable is fully stowed. The same example calls for separate spaces for port and starboard cables.
Read those features together: the question is not just whether a plan labels enough space, but how the cable sits relative to its route out of storage. A compartment shape and pipe position that look clear in isolation should be considered as one arrangement. This historical CSR example is limited to the ship types and edition cited; it does not establish the requirements for every vessel. It also does not mean that every internal dividing bulkhead is watertight.
Closing openings and draining the locker
Limiting incoming water, maintaining boundary integrity and providing drainage address different aspects of the arrangement. The cited 2019 CSR example requires watertight locker boundaries and access openings, measures to minimise flooding probability in bad weather, and adequate drainage facilities. A drainage provision does not by itself establish that an opening or boundary meets its required integrity, and an ingress-control feature does not replace the drainage provision.
IACS UR L4, Rev.3/Corr.2, February 2022, specifies permanently attached closing appliances for spurling pipes through which anchor cables pass, to minimise water ingress. Its stated applicability is limited to ships within the cited Load Line Convention or Protocol scope and associated construction conditions; this edition is not presented as a current applicability check for a particular ship. The language is about minimising ingress, not a guarantee of watertight closure around a moving chain.
The same L4 edition separately addresses the integrity of certain access covers below the weather deck. On a drawing, distinguish an access cover from the closing appliance at the cable pipe and from the drainage arrangement. A label saying “closure” is not enough to tell which opening or function is being described.
What the bitter end secures
The bitter end is the inboard end of the anchor cable. Wärtsilä's definition describes a clench-pin attachment in the locker, but that is one described arrangement, not a universal design for every ship. Identify the attachment and its support on the particular vessel rather than assuming their form from the term alone.
In the cited 2019 CSR example, provision is made to secure the inboard chain ends to the structure, and the attachment and supporting structure have their own chain-strength-based design criteria. Those criteria should not be read as a claim that the bitter-end attachment is the normal full-strength anchoring load holder.
The same CSR example calls for an arrangement allowing emergency release from an accessible position outside the chain locker. This is a design and accessibility characteristic, not an instruction to enter the space or operate the release. The anchor chain connections guide explains connection terminology elsewhere in the cable without assuming a particular bitter-end mechanism.
Drawing-reading checklist
Use the table to organise questions for the vessel's actual drawings and applicable requirements. It does not approve a layout or specify a procedure.
| Drawing item | What to locate | Question for review |
|---|---|---|
| Storage and lead | Locker shape, cable spaces and pipe entrances | Is the fully stowed cable's route to each pipe shown clearly? |
| Water boundaries | Locker boundaries and access openings | What integrity is required at each boundary or opening? |
| Pipe closure | Closing appliance at the cable's spurling pipe | Is the appliance identified separately from the access cover? |
| Drainage | Drainage provision for the locker | Is it shown as a distinct function from limiting water ingress? |
| Bitter end | Attachment, supporting structure and outside release position | Are the attachment basis and the accessibility of the release arrangement identifiable? |
Next step: read the arrangement as a whole
For a drawing review, bring the chain particulars together with the general arrangement and details of the locker, pipe openings, drainage and end attachment. Note the rule set and edition used for the vessel, and resolve missing details with the responsible designer or classification body. The anchor chain overview provides further terminology for the cable itself.
References
- Wärtsilä Encyclopedia, “Chain locker,” https://www.wartsila.com/encyclopedia/term/chain-locker; “Chain pipe,” https://www.wartsila.com/encyclopedia/term/chain-pipe; “Bitter end,” https://www.wartsila.com/encyclopedia/term/bitter-end. Definitions and one described attachment arrangement.
- IACS, Common Structural Rules for Bulk Carriers and Oil Tankers, January 2019, Part 1, Chapter 11, Section 3, 3.5.1–3.5.2, public reproduction: https://www.imorules.com/GUID-AC6535E2-4B3B-4E12-AB63-C3D0F72E4FCA.html. Historical example for the specified ship types.
- IACS UR L4, Rev.3 March 2011 / Corr.2 February 2022, items 1, 3–4 and applicability note, official PDF: https://iacs.s3.af-south-1.amazonaws.com/wp-content/uploads/2022/02/12152935/ur-l4rev3corr2.pdf. Applicability is limited by the text's Load Line and construction conditions; current edition not verified.


